WALL PUTTY

Description

Wall Putty Dealers in Mumbai, and Panvel

Wall putty is a white cement-based fine powder that provides a smooth and even surface for painting. It also protects the walls from moisture, cracks and flaking. There are different types of Wall Putty Dealers in Mumbai, and Panvel in the market, such as JK White Wall Care Putty, JKCement WallMaxX, JKCement ShieldMaxX and JKCement SmoothMaxX.

The best way to apply wall putty depends on the type and condition of the wall, but here are some general steps that you can follow:

• Prepare the wall by scraping off any loose material, dust, dirt or grease. Use sandpaper or a wire brush to smooth out any bumps or cracks. Wet the wall with clean water to help the putty adhere better.
• Mix the wall putty powder with water in a bucket to form a smooth paste. Use a mechanical stirrer or a stirring stick to avoid lumps. The ratio of water to putty may vary depending on the brand, so follow the instructions on the package.
• Apply the wall putty with two flat-bladed trowels, one small and one large. Use the small trowel to scoop up some putty and spread it on the large trowel. Then use the large trowel to apply the putty evenly on the wall in thin coats. Start from one corner and work your way out.
• After the final coat of putty has dried, you can apply a primer and then paint over it as desired.

If you are looking for wall putty dealers near your location in Mumbai, Panvel you can contact Lichade and Daughters Pvt. Ltd. I hope this helps you find the best wall putty dealer for your needs.